Load data for:
5.7 x 28 || .224 | 50gr | Hornady V-MAX
You need to be a member to bookmark a load - more info here!
Technical Specifications
Bullet: | .224 | 50gr | Hornady V-MAX |
Bullet Weight: | 50gr | 3.2g |
Bullet Diameter: | 0.224" | 5.69mm |
Bullet Length: | 0.800" | 20.3mm |
Caliber: | 5.7 x 28 |
Case Length (l3): | 1.134" | 28.8mm |
Cartridge Length (C.O.L.): | 1.570" | 39.9mm |
Seated Depth: | 0.364" | 9.2mm |
Shank Seated Depth: | 0.304" | 7.7mm |
Case Capacity: | 12.3 Grains of Water | 0.80 cm3 |
Primer Size: | Small Pistol (SP) |
LID: | LID_B2508_C925 |
Load data for 26 loads in caliber 5.7 x 28 with .224 | 50gr | Hornady V-MAX bullet including underlying parameters such as bullet length, cartridge length, and case capacity. The loads are based on a cartridge with a case capacity of 12.34 Grains of Water and a seated depth of 0.36" / 9.2 mm and a Small Pistol (SP) primer. NOTICE: Use the "Personalized Load Calculator" to adjust to your own specifications.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.
a load must fulfill certain criteria to be listed below - see here.
our load data might deviate from other sources - see most common reasons here.
all loads are based on the bullet and case dimensions shown further below - see here what to do if you deviate.
you can set your own specifications in the "Personalized Load Calculator"
Go to "My Account " bottom of the page to define the measure system (imperial vs. metric)
No data yet
.
You can add a specific load / powder to your Diary. You can add a weapon and/or edit the entry any time. Select the specific powder to proceed.
select powder first
you have over 25 entries already. Go to your Diary and delete some to add new ones.
P Name | C | FR | MaxP | % | v | z |
---|---|---|---|---|---|---|
ADI AP 100 | [locked] | 97% | 44237 | 88% | 1703 | 100% |
[Accurate 4100]* | [locked] | 96% | 43859 | 88% | 1759 | 83% |
[Alliant 2400]* | [locked] | 92% | 42757 | 85% | 1755 | 86% |
Maxam CSB 1 | [locked] | 84% | 43192 | 86% | 1512 | 100% |
[Ramshot Enforcer]* | [locked] | 93% | 43801 | 88% | 1785 | 88% |
Rottweil P 805 | [locked] | 85% | 44773 | 89% | 1421 | 100% |
Rottweil P 806 | [locked] | 84% | 44512 | 89% | 1755 | 100% |
SNPE Vectan A0 | [locked] | 83% | 43004 | 86% | 1568 | 100% |
SNPE Vectan BA7 1/2 | [locked] | 88% | 43976 | 88% | 1650 | 100% |
Vihtavuori 3N38 | [locked] | 91% | 43671 | 87% | 1722 | 97% |
Vihtavuori N105 | [locked] | 97% | 43787 | 88% | 1781 | 100% |
Vihtavuori N32C Tin Star | [locked] | 96% | 39682 | 79% | 1345 | 100% |
Vihtavuori N350 | [locked] | 84% | 44135 | 88% | 1654 | 100% |
Max Load - Barrel Length:
5.5" | 14cm
P Name | C | FR | MaxP | % | v | z |
---|---|---|---|---|---|---|
ADI AP 100 | [locked] | 80% | 29834 | 60% | 1480 | 97% |
[Accurate 4100]* | [locked] | 92% | 39059 | 78% | 1680 | 81% |
[Alliant 2400]* | [locked] | 82% | 31792 | 64% | 1575 | 81% |
Maxam CSB 1 | [locked] | 80% | 40103 | 80% | 1480 | 100% |
[Ramshot Enforcer]* | [locked] | 80% | 28993 | 58% | 1532 | 80% |
Rottweil P 805 | [locked] | 81% | 41568 | 83% | 1388 | 100% |
Rottweil P 806 | [locked] | 80% | 39798 | 80% | 1686 | 100% |
SNPE Vectan A0 | [locked] | 80% | 39987 | 80% | 1526 | 100% |
SNPE Vectan BA7 1/2 | [locked] | 81% | 36303 | 73% | 1545 | 100% |
Vihtavuori 3N38 | [locked] | 82% | 33388 | 67% | 1572 | 94% |
Vihtavuori N105 | [locked] | 80% | 26469 | 53% | 1493 | 95% |
Vihtavuori N32C Tin Star | [locked] | 80% | 29617 | 59% | 1220 | 100% |
Vihtavuori N350 | [locked] | 81% | 41118 | 82% | 1624 | 100% |
Start Load - Barrel Length:
5.5" | 14cm
C ... powder charge in Grains
FR ... fill rate of the cartridge in percent
MaxP ... max. pressure of load in psi
% ... max. pressure of load in percent of the maximum allowed pressure for this caliber
v ... velocity in feets per second (fps)
z ... powder burnt in percent
[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.
[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.